iFi Audio Zen CAN Signature HFM Headphone Amplifier

iFi Audio
20 In stock
$299.00
Your own personal Signature Finely Tuned. The original ZEN CAN, our all-analog headphone amplifier, had the ability to drive tough headphone loads with a balanced circuit design, vanishingly low levels of distortion, and exceptional sonics. The ZEN CAN Signature 6XX pushed this design even further with sonic tailoring specific to...
$299.00

Your own personal Signature

Finely Tuned.

The original ZEN CAN, our all-analog headphone amplifier, had the ability to drive tough headphone loads with a balanced circuit design, vanishingly low levels of distortion, and exceptional sonics. The ZEN CAN Signature 6XX pushed this design even further with sonic tailoring specific to the ‘MassDrop x Sennheiser HD 6XX headphone’.

This custom ActivEQ setting is expertly tuned across the entire frequency response curve to bring out the best in these already remarkable headphones.

Take a look at what’s in the box.

iFi's Active EQ

Our ActivEQ feature combines active and passive components to create a specific EQ curve to suit a particular pair of headphones. This is performed in the analog domain without adding any additional noise or distortion.

Gain, Gain, and more Gain.

The ZEN CAN Signature HFM has four gain settings in six dB steps – 0dB, 6dB, 12dB, and 18db. We’ve called this PowerMatch.

This enables the amp to precisely suit the connected headphones. Unity gain (0dB) is useful to ensure low noise with sensitive in-ear monitors, while the higher gain settings make the most of tougher headphone loads, delivering excellent dynamic headroom.

Nothing beats Balanced.

The ZEN CAN Signature HFM’s circuitry is a balanced, symmetrical dual-mono design – a topology usually reserved for high-end headphone amps – with a number of key elements trickled down from the discrete Class-A circuitry developed for iFi’s flagship headphone amplifier, the Pro iCAN.

Key components have been upgraded to enhance performance in line with the improvements made to the ZEN CAN Signature HFM, including the use of Panasonic OS-CON and Elna Silmic II capacitors.

Technical Specs

Inputs RCA
Headphone output
Gain
THD+N (A-Weighting)
3.5 (SE), 4.4mm (BAL))
6.35 mm, 4.4 mm
0 dB, 6 dB,12 dB,18 dB adjust
0.0066% (BAL), 0.0058% (SE)
Output Impedance (HP) BAL
SE
<2 Ohms
<1 Ohm
ZOUT Balanced line out
200 ohms
SNR 122 dB (BAL)
Dynamic range -122 dB (BAL)
Frequency response (-3dB): 10 Hz – 200 kHz
Function Button HFM adaption and/or XSpace; Bypass
IMD 0.01%
Power Maximum output power (16 ohms)
Maximum output power (300 ohms)
Maximum output power (600 ohms)
Maximum power consumption
3.0 V / 600 mW (BAL), 4.0 V / 1000 mW (SE)
5.1 V / 756 mW (BAL), 7.6 V / 196 mW (SE)
15.2 V / 385 mW (BAL), 7.6 V / 98 mW (SE)
13 W / 2.6A
Dimensions 160(w) x 117(d) x 35(h) mm
6.3" x 4.6" x 1.4"
Weight 1.87 Ibs (0.85 kg)
You have successfully subscribed!
This email has been registered