Legacy Audio Focus SE Floor Standing Speakers (Pair)

Legacy Audio
Many in stock
Floor Standing Speakers
$11,962.50
Availability: May take 1 to 7 days to ship and may need to be specially ordered. Please contact us if you have any questions. Available in the following finishes (listed in order as shown in samples below): Standard Finishes: Medium Oak, Black Oak, Natural Cherry, and Walnut. Premium Finishes: Rosewood,...
$11,962.50

Availability: May take 1 to 7 days to ship and may need to be specially ordered. Please contact us if you have any questions.

Available in the following finishes (listed in order as shown in samples below):

Standard Finishes: Medium Oak, Black Oak, Natural Cherry, and Walnut.

Premium Finishes: Rosewood, Black Pearl, Curly Maple, and Natural Brown.

Exotic Finishes: Birdseye Maple, Cabernet Sapele Pommele, and Olive Ash Burle.

Contact us to discuss finish options and any additional questions you may have.

A favorite of recording and mastering studios, audiophiles, and home theater enthusiasts alike, the Focus SE is the reference standard in full-range speakers. More than a quarter-century of continuous refinement empowers the Focus SE with masterful resolution and unsurpassed dynamics.

“I started by re-sculpting the cabinet, making it a bit narrower, yet deeper. I stiffened and angled the sidewalls, front baffle, and cabinet top to avoid parallel surfaces and potential standing waves. Facets were machined into the cabinet corners to progressively narrow the baffle with rising frequency. Even the grille of the FOCUS SE has been sculpted to prevent diffraction.

While the driver tolerances on the FOCUS are a stringent +/- 1dB of the target function, the FOCUS SE drivers are then performance-matched to +/-0.25 dB. The measurement data is then recorded in our database and archived by serial number.

I chose to use Solen metalized polypropylene capacitors imported from France as bypasses in the high-frequency network and braided silver cable to the upper ribbon.

The FOCUS SE makes a statement of quality and performance that I feel is unmatched by any other company at twice the price.” ~ Chief Designer, Bill Dudleston

Since some smaller rooms can load up in the 60 to 80 Hz region when driven by full-range speakers, a sculpting network can be activated to tame such conditions. It is completely out of circuit until engaged, yet eliminates overhang or ‘droning’ when needed.

Black chromed cone feet, turned from solid brass, properly anchor the speaker to the floor boundary. A knurled adjustable leveling washer is incorporated. An elastomeric isolation pad is installed between the cabinet and cone to prevent re-radiation of mechanically induced vibration reaching the listener.

The 14 step Black Pearl finish is cured for three weeks prior to hours of hand polishing and buffing. The completed system is protected by a custom-made velvet bag and encased by three-inch-thick polyethylene foam for transport.

Marking a quarter of a century of continuous refinement."

Specifications:

  • Application: Full range tower with mastering grade clarity and high efficiency
  • System Type:6 driver, 4 way
  • Tweeter: Dual Air Motion Tweeter System- 1" AMT Super Tweeter, silver HF wire
  • Midrange: Dual Air Motion Tweeter System- 4" AMT Tweeter
  • Midwoofer: Dual 7" Silver Graphite, cast frame
  • Subwoofer: Dual 12" ultra-linear bass drivers with 15 lb motor
  • Low-Frequency Alignment: Assisted 6th order Butterworth, dual rear ported
  • Inputs:2 Pair binding post for Treble and Bass
  • Internal Amplification: None, Internal Amplification available in the Focus XD
  • Recommended Amplification:30 - 750 Watts
  • Freq. Response (Hz, +/-2dB):18-30K
  • Impedance:4 Ohm
  • Sensitivity:95.4 dB (2.83V@1m)
  • Crossover:120, 2.8K, 8K
  • Dimensions HxWxD (inches):55 x 14 x 15.375
  • Shipping Dimensions HxWxD (inches):62 x 22 x 22
  • Weight (each):136 Ibs
You have successfully subscribed!
This email has been registered